Perryman

Perryman Channel Strip with input and output meters and its four reorderable inserts
Snare crack keys the gate and blends FET compression with the drum signal. Enlarge panel
Vintage panel Snare crack keys the gate and blends FET compression with the drum signal.
Tweed room crush The FET compressor sits before the Tweed preamp. The compressed room sound then hits 21 dB of preamp drive.
Bass pocket The VCA catches the bass before the inductor EQ. The low shelf adds weight and the mid band takes a little out.
Rhythm guitar An optical compressor follows the inductor EQ. Its blend is set to 75% so some of the pick attack comes through dry.
Clean Controls Snare crack with the graphic EQ open. The response curve follows the ten band gains.

Reorderable channel strip

Put a sagging Tweed amp after a fast limiter or drop an optical leveller behind an inductive EQ. Perryman lets you test all twenty-four module orders until the room mic swells or the bass cuts straight through.

Audio Unit for Logic Pro · macOS 11+

Making a drum room bloom

Open Clean desk on a drum room mic, switch to Tweed room crush and match the output level. The compressor starts before the preamp. Drag it after the preamp and listen to the cymbal wash between hits. The room changes character even though you haven’t moved a knob.

Choose a preamp
Try the transformer bite of Iron 73, the supply sag of the cabinet-free Tweed Deluxe, the cleaner Console 4K or the two-stage Valve 610.
Targeted dynamics and gating
Choose fast-clamping FET 76, smooth Optical 3A or hard-knee VCA 160 compression alongside an internally keyed gate with hold, depth and filtered key.
EQ and parallel compression
Put the ten-band Graphic 560 before drive to choose which frequencies break up first, or use the broad Inductor 73 afterwards. Blend the original attack back in with the compressor’s parallel mix.

Tweed room crush order swap

  1. Load Clean desk on a drum room mic, then switch to Tweed room crush and level-match the output.
  2. Audition the room decay with the compressor sitting before the Tweed preamp.
  3. Drag the compressor after the preamp and listen again at matched level.
Save card

What’s modelled

All stages are original circuits informed by published control layouts with no sampled hardware units and no external gate sidechain.

Drawmer’s DS201 gate controls

Specifications

Format & version
AUv2 · 1.1.5
Build target
macOS 11 or later
Processor
Apple silicon & Intel
Channel layouts
Mono and stereo
Perryman