All field notes

Why boost treble before tape and cut it afterwards?

A matched playback cut brings quiet hits back close to flat. A loud hi-hat can still saturate the tape in Spool Eight.

Start with one bright part

Loop a hi-hat pattern or an acoustic guitar. In Spool Eight, open 58 Treble Print and set Playback EQ to Matched cut. Listen to a quiet hit next to a loud one. Turn Print EQ from 0 to +6 dB while keeping the playback setting matched.

Listen at the front of the note

The first shelf lifts high frequencies before they reach the tape model. The second shelf takes them down on the way out. At low level, with both shelves matched, the frequency balance comes back close to flat. When a bright peak drives the tape into saturation, a cut after the tape cannot reconstruct the peak’s original shape.

Now listen in the gaps

The rack adds tape noise between the two shelves when Hiss is on. The playback cut acts on that noise too. Alternate between Matched cut and Flat return to hear how much work the second shelf is doing. Match overall levels before you decide which take you prefer.